EMC for Product Designers

Informationen zum Autor Tim Williams worked for a variety of companies as an electronic design engineer, before startinghis own consultancy specializing in EMC design and test advice and training. He has monitored the progress of the EMC Directive and its associated standards since it was first made public, over the last 25 years. Klappentext EMC for Product Designers, Fifth Edition, provides all the key information needed to meet the requirements of the EMC compliance standards. More importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties to meet the needs of specific standards that produce a better overall product. As well as covering the 2016 versions of the EU EMC and Radio Directives, this new edition has been thoroughly updated to be in line with the latest best practices in EMC compliance and product design. Coverage now includes extra detail on the main automotive, military, and aerospace standards requirements, as well as a discussion of the issues raised by COTS equipment in military applications. New to this edition are chapters on functional safety, design and installation aspects of switchmode power converters with an introduction to EMC testing of integrated circuits, new details on CISPR 32/35, updates to new versions of the Directives DEF STAN 59-411, DO-160 and MIL STD 461, with more commentary on the implications and requirements of military and aerospace standards, and an added reference to CE Marking for military and problems of COTS. In addition, new sections on IC emissions measurements per IEC 61967 are included, along with new coverage of FFT/time domain receivers, an expanded section on military/aerospace transients, special references to DO160 lightning, added material on MIL STD 461 CE101, RE101, and RS101, the latest practice in PCB layout with a discussion of slots in ground planes, current practice on decoupling, extended coverage of DC-DC converters and motor drives, and a new section on switching inverter (motor drives, renewable energy converters, etc.) installation, and the latest 2016 mandatory regulations of the RTTE and EMC Directives. Inhaltsverzeichnis Part 1: Legislation and Standards 1. Introduction 2. The EMC and Radio Directives 3. International EMC compliance requirements 4. Commercial standards 5. Other standards and legislation 6. EMC and Functional Safety Part 2: Testing 7. RF emissions measurements 8. Immunity tests 9. Low frequency tests 10. Test planning Part 3: Design 11. Interference coupling mechanisms 12. Layout and grounding 13. Digital and analogue circuit design 14. Interfaces and filtering 15. Shielding 16. Systems EMC 17. EMC management ...

Klappentext

EMC for Product Designers, Fifth Edition, provides all the key information needed to meet the requirements of the EMC compliance standards. More importantly, it shows how to incorporate EMC principles into the product design process, avoiding cost and performance penalties to meet the needs of specific standards that produce a better overall product. As well as covering the 2016 versions of the EU EMC and Radio Directives, this new edition has been thoroughly updated to be in line with the latest best practices in EMC compliance and product design. Coverage now includes extra detail on the main automotive, military, and aerospace standards requirements, as well as a discussion of the issues raised by COTS equipment in military applications.

New to this edition are chapters on functional safety, design and installation aspects of switchmode power converters with an introduction to EMC testing of integrated circuits, new details on CISPR 32/35, updates to new versions of the Directives DEF STAN 59-411, DO-160 and MIL STD 461, with more commentary on the implications and requirements of military and aerospace standards, and an added reference to CE Marking for military and problems of COTS.

In addition, new sections on IC emissions measurements per IEC 61967 are included, along with new coverage of FFT/time domain receivers, an expanded section on military/aerospace transients, special references to DO160 lightning, added material on MIL STD 461 CE101, RE101, and RS101, the latest practice in PCB layout with a discussion of slots in ground planes, current practice on decoupling, extended coverage of DC-DC converters and motor drives, and a new section on switching inverter (motor drives, renewable energy converters, etc.) installation, and the latest 2016 mandatory regulations of the RTTE and EMC Directives.

Inhalt

Part 1: Legislation and Standards
1. Introduction

2. The EMC and Radio Directives
3. International EMC compliance requirements
4. Commercial standards
5. Other standards and legislation

6. EMC and Functional Safety

   Part 2: Testing
   7. RF emissions measurements

7. Immunity tests
8. Low frequency tests

9. Test planning

   Part 3: Design
   11. Interference coupling mechanisms

10. Layout and grounding
11. Digital and analogue circuit design
12. Interfaces and filtering
13. Shielding
14. Systems EMC
15. EMC management