Finite Element Modeling of beam column joint of opening bending moment

In most of the civil structures, continuity between two adjacent members is necessary; this can be even though the members' angle. The joint formed from this assembling usually refers to the "corner".The term ''corner'' in this investigation is used to describe a corner joint formed by the joining; at 90 degree of the ends of two flexural members. In general, the failure of opening corners is invariably characterized by the low tensile strength of concrete, resulting in the initiation of a splitting tensile crack originating at the re-entrant corner and gradually moving out along the corner diagonal towards the exterior corner Various studies have been carried out experimentally by using fibers in the corners under opening and closing corners, but no research has been carried out to validate these results analytically. This study is carried out to perform the tests experimentally and then to validate the results analytically using finite element modelling of the fibrous and non-fibrous concrete corner joints under opening moments.

Autorentext

Author was born in Patiala district patiala Punjab India .She obtained her B.E, First Class,(2003) and M.E Structures, First Class with Distinction, (2005) both from Thapar Institute of Engineering and Technology, Patiala now Thapar University. She did his Ph.D in structures from PTU in April, 2015.