Lead Free Solder

The industry of electronic packaging is fast moving towards lead-free solders because of environmental and health concerns. Among the various surface finishes available, electroless nickel/ immersion gold (ENIG) is the most appealing at the moment. Unfortunately, the presence of phosphorus (P) may complicate the interfacial reactions and may affect the reliability of the solder joint. In order to minimise this problem, an alternative surface finish were introduced, in which a layer of palladium is introduced between the nickel and gold layers using electroless deposition. This book explores this question in detail with the effect of annealing and aging of Sn-37Pb eutectic solder and Sn-4Ag-0.5Cu solder on ENIG and ENEPIG surface finishes. Other parameters involved are P content in Ni layer and the Ni layer thickness. The intermetallics (IMC) were characterized in terms of thickness, morphology and composition.

Autorentext
Dr Azmah Hanim was born in Penang, Malaysia. She obtained her PhD in Mechanical Engineering from University Technology Malaysia in 2008. After working as a senior material technology development engineer in Intel, she joined University Putra Malaysia as a senior lecturer. Her current research interest is on lead free soldering reliability.