Optimization of Machining Parameters of Electrical Discharge Machine

Electric discharge machining is a thermo-electric non-traditional machining process. Material is removed from the work piece through localized melting and vaporization of material. Electric sparks are generated between two electrodes when the electrodes are held at a small distance from each other in a dielectric medium and a high potential difference is applied across them. Localized regions of high temperatures are formed due to the sparks occurring between the two electrode surfaces. Work piece material in this localized zone melts and vaporizes. Most of the molten and vaporized material is carried away from the inter-electrode gap by the dielectric flow in the form of debris particles. To prevent excessive heating, electric power is supplied in the form of short pulses. Spark occurs wherever the gap between the tool and the work piece surface is smallest. After material is removed due to a spark, this gap increases and the location of the next spark shifts to a different point on the work piece surface. In this way several sparks occur at various locations over the entire surface of the work piece corresponding to the work piece-tool gap.

Autorentext

S.Sundaraselvan est titulaire d'un B.E (mécanique) et d'un M.E (fabrication) de l'Université Anna, Chennai, Inde. Il a obtenu son doctorat (génie mécanique) en 2021 à l'université d'Anna, en Inde. Il a commencé sa carrière en tant que professeur assistant en 2012 et occupe actuellement le poste de professeur associé en génie mécanique.