REMOVAL AND RECOVERY OF CHROMIUM FROM AQUEOUS SOLUTIONS

Removal of toxic and heavy metal contaminants from aqueous waste streams and industrial effluents is one of the most challenging global environmental issues. Chromium salts are the most widely used chemicals for tanning processes, but about 30% of the chromium amount remains in the solids and liquid wastes (especially spent tanning solutions). Therefore, the removal and recovery of the chromium content of these wastewaters is necessary for environmental protection and economic reasons. The possibility of using bypass cement kiln dust (BCKD) as a low cost and natural adsorbent is investigated in this work for the removal of Cr(III) from synthetic and real wastewater by adsorption technique. The parameters effect on removal process are investigated. The adsorption mechanistic, equilibrium, kinetics and thermodynamics are tested for both synthetic and real wastewater, beside adsorption process also desorption process for Cr (III) recovery are done.

Autorentext

He is lecturer of Chemical Engineering at Misurata University Khoms city, Libya. Dr Ibrahim received his BSc and MSc in Chemical Engineering from Al-Mergheb University at Libya and his PhD in Chemical Engineering from West Coast University at USA. Interest with Modeling, Transport Phenomena, Wastewater Treatment and Air Pollution Control.